Switch Controller Grab Handle Mounting 6 Gang Switches Panel for Jeep Wrangler JL 2018 2019 2020 2021 2022 2023

The 4X4WAVERS 6-gang switch controller replaces the passenger-side grab handle on a Jeep Wrangler JL with a wireless switch panel, so auxiliary lights, a fan and other accessory circuits can be switched from the cabin without routing a switch harness through the dash.

Why this panel

• Mounts to the factory passenger grab handle instead of cutting into the dash or centre console
• Links to its control box over 2.4 GHz, so the power wiring stays at the control box
• Six independently switched circuits with two-colour backlighting and a flash function
• Rechargeable over USB-C and rated from -40 °C to +85 °C
• Aluminum housing with polycarbonate switch faces

Specifications

• Circuits: 6 gang, independently switched
• Operating voltage: DC 12 V – 24 V
• Panel battery: 3.7 V / 600 mA, rechargeable
• Charging port: USB-C, 5 V / 1 A (works with a C-to-C cable)
• Wireless link: 2.4 GHz to the paired control box
• Operating temperature: -40 °C to +85 °C
• Materials: aluminum and polycarbonate
• Backlighting: two colours, with flash function

Common questions

Where does it mount? On the passenger-side grab handle. The panel clamps to the existing handle, so the dash and centre console are left alone.

What can each switch run? Each of the six channels switches a circuit through the control box — light bars, light pods, a cabin fan and similar accessory loads.

How is the panel powered? The panel runs on its own rechargeable 3.7 V battery, topped up over USB-C. The control box is what connects to the vehicle's power.

Does the switch panel need wiring into the cabin? No. The panel talks to the control box wirelessly over 2.4 GHz, so only the control box is wired.

Fitment

• Jeep Wrangler JL – 2018, 2019, 2020, 2021, 2022, 2023

Buy With Confidence From 4X4WAVERS

Buy with confidence from 4X4WAVERS — learn more about 4X4WAVERS