Edge EZX Performance Tuner & Inline Module | 2021-2025 Ford Bronco & Bronco Raptor

Edge EZX Performance Tuner for Ford Bronco & Bronco Raptor – More Power, Better Throttle Response, Complete Smartphone Control

The Edge EZX Inline Module is one of the most advanced plug-and-play performance upgrades available for the 2021-2025 Ford Bronco and Bronco Raptor. Designed specifically for Bronco owners who want more power, sharper throttle response, larger tire calibration capabilities, and enhanced vehicle customization without permanently modifying factory programming, the EZX delivers impressive performance gains while maintaining easy removability.

Because the EZX communicates through a sophisticated inline module and smartphone-controlled tuning platform, drivers can instantly adjust power levels, throttle sensitivity, TPMS settings, Auto Start/Stop behavior, speedometer calibration, and numerous convenience features directly from their mobile device. Edge testing shows gains of up to 55 horsepower and 69 lb-ft of torque on the 2.7L EcoBoost, up to 26 horsepower and 69 lb-ft on the 2.3L EcoBoost, and up to 45 horsepower and 77 lb-ft on the Bronco Raptor's 3.0L EcoBoost engine. These gains are achieved without ECM flashing, making installation and removal exceptionally simple. :contentReference[oaicite:5]{index=5}

As Edge engineers describe it, the EZX acts as "your truck's new brain," providing unprecedented control over both performance and convenience functions. Through the Edge smartphone application for iOS and Android devices, users can switch power levels on demand and tailor vehicle behavior to match highway driving, daily commuting, towing, overlanding, or off-road exploration. :contentReference[oaicite:6]{index=6}

Unlike many conventional tuners that require extensive reflashing procedures, the EZX installs using a true plug-and-play design. The module can be removed without leaving permanent traces, making it an attractive option for enthusiasts seeking increased performance while preserving factory serviceability.

For Bronco owners running larger tires, overlanding builds, roof-top tents, recovery gear, or heavier aftermarket accessories, the EZX helps restore responsiveness while unlocking additional customization capabilities not available through factory settings.

Technical Specifications

Vehicle Fitment

• Ford Bronco Base | 2-Door & 4-Door | 2021-2025 | 2.3L EcoBoost
• Ford Bronco Big Bend | 2-Door & 4-Door | 2021-2025 | 2.3L / 2.7L EcoBoost
• Ford Bronco Black Diamond | 2021-2025 | 2.3L / 2.7L EcoBoost
• Ford Bronco Outer Banks | 2021-2025 | 2.3L / 2.7L EcoBoost
• Ford Bronco Badlands | 2021-2025 | 2.3L / 2.7L EcoBoost
• Ford Bronco Wildtrak | 2021-2025 | 2.7L EcoBoost
• Ford Bronco Heritage | 2023-2025 | Supported Engines
• Ford Bronco Everglades | 2022-2025 | 2.3L EcoBoost
• Ford Bronco Raptor | 2022-2025 | 3.0L EcoBoost

Not Compatible With:

• Ford Bronco Sport
• Non-listed Ford platforms
• Unsupported engine configurations

Installation Notes

• True plug-and-play installation.
• No ECM flashing required.
• Smartphone required for feature access and tuning adjustments.
• 91-octane fuel was used during manufacturer testing.
• Verify local emissions compliance requirements before installation.
• Professional installation recommended for best results.

Frequently Asked Questions

How much power does the Edge EZX add?

Depending on engine configuration, gains range up to 55 HP and 69 lb-ft on the 2.7L EcoBoost and up to 45 HP and 77 lb-ft on the Bronco Raptor 3.0L.

Can I adjust settings from my phone?

Yes. The EZX uses the Edge smartphone application for iOS and Android devices.

Can I calibrate for larger tires?

Yes. Speedometer calibration supports measured tire sizes up to approximately 36.25 inches.

Can I disable Auto Start/Stop?

Yes. The EZX provides Auto Start/Stop control functionality on supported vehicles.

Does it leave permanent traces?

No. The module can be removed without ECM reflashing, making it easy to return the vehicle to stock configuration.

SKU: 12715