Automatic Power-Deploying Running Boards with Instant OBD-II Plug-N-Play Connectivity
The AMP Research PowerStep™ Electric Running Boards (MPN: 76152-01A | SKU: BGQD_76152-01A) combine seamless vehicle entry with a hidden, aerodynamic flush-mounted profile when stowed. Purpose-built to handle severe sub-zero winter freeze cycles, thick road mud, and corrosive highway de-icing agents across Canadian routes, these automatic power-deploying steps instantly drop down when any door opens and retract cleanly under the cab rocker panel within three seconds of closing. Automotive customization specialists emphasize that adding electric running boards provides a wide, comfortable stepping height without sacrificing ground clearance or off-road ramp-over angles.
Because this system features a vehicle-specific Plug-N-Play wiring harness that plugs directly into your truck's factory OBD-II port, installation eliminates the complex door-panel wiring splices required by older motorized steps. Constructed from high-strength die-cast aluminum alloy components with an all-weather textured black powder-coat finish, each side supports up to 600 lbs. SEMA vehicle styling and safety evaluations confirm that integrated low-profile LED courtesy lights automatically illuminate the stepping surface in dark conditions, ensuring safe footing for passengers at night.
Technical Specifications
| Specification Feature |
Engineered Product Details |
| Brand Alignment |
AMP Research (PowerStep™ Series) |
| Manufacturer Part Number (MPN) |
76152-01A |
| Store SKU Identifier |
BGQD_76152-01A |
| Weight Capacity Rating |
600 lbs. (272 kg) per Side Load Capacity |
| Step Board Material |
Die-Cast Aircraft-Grade Aluminum Alloy |
| Surface Finish |
Textured Black PTFE Powder-Coat (Corrosion Resistant) |
| Stepping Surface Width |
6.00 Inches Wide Non-Slip Stepping Profile |
| Integration Technology |
OBD-II Port Plug-N-Play Microprocessor Control Module |
| Integrated Courtesy Lighting |
Includes 4 Weatherproof LED Light Assemblies |
| Deployment Speed |
Extends/Retracts Automatically in Under 3 Seconds |
| Factory Limited Warranty |
5-Year / 60,000-Mile Limited Manufacturer Warranty |
Vehicle Fitment
This electric running board kit is custom-engineered explicitly for 14th-generation Ford F-150 gas-engine truck models. Review your specific cab configuration below for accurate fitment details:
-
Ford F-150 SuperCrew (XL, XLT, Lariat, King Ranch, Platinum, Tremor, Raptor; 5.0L V8, 3.5L EcoBoost, 2.7L EcoBoost, 3.3L V6) | 2021, 2022, 2023, 2024, 2025, 2026
-
Ford F-150 SuperCab (XL, XLT, Lariat; Boards require minor length trimming per factory instructions) | 2021, 2022, 2023, 2024, 2025, 2026
-
Ford F-150 Regular Cab (XL, XLT; Boards require minor length trimming per factory instructions) | 2021, 2022, 2023, 2024, 2025, 2026
Strict Fitment Exclusions: This kit is NOT compatible with Ford F-150 PowerBoost 3.5L Full-Hybrid models or fully electric Ford F-150 Lightning EV platforms due to underbody high-voltage wiring, frame structure, and battery pack harness interference.
Installation Notes
Featuring a direct bolt-on rocker panel linkage mount and Plug-N-Play OBD-II harness, this kit reduces wiring complexity significantly compared to traditional hardwired steps. While SuperCrew models require zero board modification, SuperCab and Regular Cab models require simple aluminum rail trimming using a standard saw.
Professional installation takes approximately 2 to 3 hours using standard shop tools. Maintain the pivot hinge pins periodically using a dry silicone spray lubricant (avoid greases or oil-based spray lubricants) to ensure smooth, whisper-quiet operation during severe winter weather.
Frequently Asked Questions
Why does this kit exclude Ford F-150 PowerBoost Hybrid and Lightning EV models?
PowerBoost Hybrid and Lightning EV trucks feature high-voltage battery banks, unique frame cross-members, and underbody wiring conduits that prevent the mounting linkages and OBD-II signal modules of kit 76152-01A from installing safely. Hybrid/EV models require specialized AMP Research part numbers.
Do I need to drill into my truck's wiring harness to connect door sensors?
No. The included Plug-N-Play OBD-II pass-through module reads digital door-ajar signals straight from the vehicle's computer CAN-bus system, eliminating the need to cut or tap into individual door wires.
How do the steps behave if ice or mud blocks them from opening or closing?
AMP PowerSteps feature built-in anti-pinch safety sensor technology. If an obstruction like thick ice, mud, or a curb is encountered while deploying or retracting, the motor instantly stops movement to prevent motor burnout or damage.
Are the steps slippery when wet or covered in snow?
No. The stepping surfaces feature a textured black powder-coat finish combined with full-length raised traction grooves to ensure surefooted grip in rain, slush, and snow conditions.
SKU: BGQD_76152-01A
