ReadyLIFT 3" SST Lift Kit w/ HD UCAs | 2021-2026 Ford Bronco Sasquatch

ReadyLIFT 3-Inch SST Lift Kit with HD Ball Joint Upper Control Arms for 2021-2026 Ford Bronco Sasquatch Models

Bottom Line: The ReadyLIFT 69-21310 SST Lift Kit is a premium suspension upgrade engineered specifically for Ford Bronco models equipped with the factory Sasquatch Package. Featuring heavy-duty tubular upper control arms, advanced high-angle ball joints, precision-machined lift components, and geometry-correcting hardware, this system delivers additional ground clearance, improved articulation, and clearance for up to 37-inch tires while maintaining exceptional on-road manners.

Because: ReadyLIFT designed the 69-21310 exclusively around the unique suspension geometry found on Sasquatch-equipped Broncos, including Badlands, Wildtrak, and First Edition trims. The kit supports up to 37x12.50-inch tires on 17x8.5-inch wheels with +18 mm offset and can accommodate up to 38-inch tires with trimming. Manufacturer-validated engineering helps maintain suspension travel and steering performance while increasing capability.

"Built for Strength, Engineered for Adventure." That philosophy drives the development of ReadyLIFT's SST suspension systems and is evident throughout the design of the 69-21310 lift package.

The factory Sasquatch Bronco already delivers impressive off-road capability, but larger tires, increased clearance requirements, overland equipment, and demanding trail conditions often require additional suspension performance. ReadyLIFT developed the SST system to enhance these capabilities without compromising reliability or drivability.

At the center of the system are heavy-duty tubular upper control arms equipped with advanced high-angle ball joints. These components are specifically engineered to improve articulation while maintaining proper suspension geometry throughout the increased ride height range. Compared to basic spacer lifts, the inclusion of upgraded control arms provides improved alignment capability and enhanced durability during aggressive off-road use.

The system incorporates CNC-machined 6061-T6 billet aluminum front spacers combined with a high-strength 4130 alloy steel preload spacer. This combination delivers additional lift while minimizing ball joint and tie-rod stress during suspension cycling.

Rear suspension geometry is addressed through the inclusion of a heavy-duty rear track bar bracket constructed from robust steel. This component helps maintain proper axle positioning and handling characteristics after lifting the vehicle.

For Bronco owners planning larger tire upgrades, the 69-21310 provides substantial flexibility. ReadyLIFT validates compatibility with 37x12.50-inch tires using 17x8.5-inch wheels and +18 mm offset. For enthusiasts seeking maximum trail presence, 38-inch tires can be accommodated with minor trimming modifications.

The 100% bolt-on design eliminates cutting, welding, and permanent modifications. Installation utilizes factory mounting locations, helping simplify installation and preserve serviceability.

Whether your Bronco is built for overlanding, technical rock crawling, backcountry exploration, or weekend trail adventures, the ReadyLIFT SST Lift Kit provides a suspension solution engineered specifically for the unique demands of Sasquatch-equipped Broncos.

Technical Specifications

Vehicle Fitment

• Ford Bronco Badlands Sasquatch | 2021-2026 | 2-Door
• Ford Bronco Badlands Sasquatch | 2021-2026 | 4-Door
• Ford Bronco Wildtrak | 2021-2026
• Ford Bronco First Edition | 2021-2022
• Ford Bronco Sasquatch Package Equipped Models | 2021-2026
• Ford Bronco Base Non-Sasquatch | NOT Compatible
• Ford Bronco Big Bend Non-Sasquatch | NOT Compatible
• Ford Bronco Outer Banks Non-Sasquatch | NOT Compatible
• Ford Bronco Raptor | NOT Compatible
• Ford Bronco with HOSS 3.0 FOX Suspension | NOT Compatible
• Ford Bronco Sport | NOT Compatible

Installation Notes

• Designed exclusively for Sasquatch-equipped Broncos.
• 100% bolt-on installation with no cutting or welding required.
• Professional wheel alignment is required after installation.
• 37-inch tire fitment may still require addressing body mount clearance during full suspension compression.
• 38-inch tires require trimming modifications.
• Retorque suspension hardware after initial break-in mileage.

Frequently Asked Questions

Does this fit a non-Sasquatch Bronco?

No. The 69-21310 was engineered exclusively for factory Sasquatch-equipped Broncos.

Will this fit a Bronco Raptor?

No. Bronco Raptor models are specifically excluded from compatibility.

Can I run 37-inch tires?

Yes. ReadyLIFT validates fitment for 37x12.50-inch tires on 17x8.5-inch wheels with +18 mm offset.

Does the kit include upper control arms?

Yes. Heavy-duty tubular upper control arms with advanced high-angle ball joints are included.

Will this fit Broncos equipped with HOSS 3.0 FOX shocks?

No. Vehicles equipped with factory HOSS 3.0 FOX suspension are not compatible.

SKU: 69-21310