ReadyLIFT Heavy-Duty Rear Track Bar Bracket | 2021-2026 Ford Bronco 3-4" Lift

ReadyLIFT Heavy-Duty Rear Track Bar Bracket for 2021-2026 Ford Bronco with 3-4 Inch Lift

Bottom Line: The ReadyLIFT 67-21361 Heavy-Duty Rear Track Bar Bracket is the geometry-correction solution designed for lifted 2021-2026 Ford Bronco models running a 3 to 4-inch suspension lift. It restores proper rear suspension geometry, corrects roll center, reduces body roll, and helps maintain factory-like handling characteristics both on-road and off-road.

Because: Raising a solid rear axle vehicle changes the operating angle of the track bar, which can negatively impact handling, axle centering, and suspension behavior. ReadyLIFT engineered the 67-21361 bracket with a highly triangulated heavy-duty design and billet reinforcement clamp to reposition the rear track bar and restore optimal geometry. Manufacturer testing confirms improved roll-center correction and enhanced durability under demanding trail conditions.

"Suspension geometry matters just as much as lift height." ReadyLIFT developed the 67-21361 specifically to address the handling compromises commonly introduced when Broncos are lifted beyond factory ride height.

When a Bronco receives a 3-inch or 4-inch suspension lift, the factory rear track bar angle changes significantly. This altered geometry can create increased body roll, reduced handling precision, and an off-center axle position. The ReadyLIFT Heavy-Duty Rear Track Bar Bracket addresses these issues by relocating the track bar mounting position to a geometry-corrected location.

The result is a suspension system that feels more predictable during highway driving, maintains improved stability through corners, and performs more confidently when navigating technical terrain. For overlanders, trail riders, and daily-driven Broncos alike, restoring suspension geometry is a critical component of a properly engineered lift system.

The bracket utilizes a highly triangulated heavy-duty steel structure paired with a billet reinforcement clamp. This design distributes loads efficiently and delivers exceptional strength under extreme articulation and off-road conditions. Unlike generic relocation brackets, ReadyLIFT engineered this system specifically around the Bronco chassis and suspension architecture.

The included billet clamp works together with the reinforced bracket structure to provide additional rigidity during aggressive off-road use. Whether tackling rocky trails, washboard roads, snow-covered routes, or heavily loaded overlanding adventures, the bracket helps maintain proper suspension operation and axle control.

Installation is straightforward and designed to complement existing ReadyLIFT SST lift systems as well as other properly configured Bronco suspension setups utilizing 3-inch to 4-inch lift heights. The system includes all required hardware, track bar clamps, and track bar spacers necessary for installation.

For Bronco owners seeking OEM-like handling after installing a larger suspension lift, the ReadyLIFT 67-21361 Rear Track Bar Bracket provides an important geometry correction component that enhances both drivability and suspension performance.

Technical Specifications

Vehicle Fitment

• Ford Bronco Base 4WD | 2021-2026 | 2-Door
• Ford Bronco Base 4WD | 2021-2026 | 4-Door
• Ford Bronco Big Bend 4WD | 2021-2026
• Ford Bronco Black Diamond 4WD | 2021-2026
• Ford Bronco Outer Banks 4WD | 2021-2026
• Ford Bronco Badlands 4WD | 2021-2026
• Ford Bronco Wildtrak 4WD | 2021-2026
• Requires Existing 3" to 4" Suspension Lift
• Ford Bronco Sport | NOT Compatible
• Stock Height Broncos | NOT Compatible
• Vehicles With Less Than 3" Lift | NOT Compatible

Installation Notes

• Requires an existing 3-inch to 4-inch suspension lift.
• Not designed for stock-height Broncos.
• Not compatible with Bronco Sport models.
• Professional installation is recommended.
• Verify rear axle alignment after installation.
• Retorque all suspension hardware after initial break-in mileage.
• May assist in correcting handling changes caused by lifted suspension geometry.

Frequently Asked Questions

Will this fit a stock-height Bronco?

No. ReadyLIFT designed the 67-21361 specifically for Broncos equipped with a 3-inch to 4-inch suspension lift.

Why is a track bar bracket needed after lifting a Bronco?

Suspension lifts alter track bar geometry. This bracket helps restore proper roll center, axle positioning, and handling characteristics.

Does this reduce body roll?

Yes. ReadyLIFT specifically engineered the bracket to help reduce body roll and improve overall handling stability.

Is hardware included?

Yes. The kit includes track bar clamps, spacer components, bracket hardware, and installation components.

Will this fit a Bronco Sport?

No. The 67-21361 is designed exclusively for full-size Bronco 4WD applications.

SKU: 67-21361