ReadyLift
ReadyAIR Helper Spring Kit | 19-26 GM 1500 Gas Models
ReadyAIR Helper Spring Kit | 19-26 GM 1500 Gas Models
Impossible de charger la disponibilité du service de retrait
ReadyAIR Load-Leveling Helper Air Spring Kit for Chevy Silverado & GMC Sierra 1500
Eliminate rear-end sag and maintain towing stability under heavy payloads with the ReadyAIR Air Helper Spring Kit, engineered specifically for gas-powered GM 1500 trucks operating in demanding overland and work conditions. According to vehicle towing dynamics assessments published by SEMA, replacing stiff dual-bellow air bags with single-sleeve LOGIQ air springs reduces harsh suspension natural frequency from 2.5Hz down to 1.6Hz, preserving factory ride comfort while supporting up to 3,200 lbs of load-leveling capacity.
As chief suspension engineers note, "Over-axle single-sleeve air springs maintain full suspension travel and factory bump stop engagement, protecting shock valving and preventing harsh bottoming-out while towing heavy trailers." Pre-assembled for a 100% bolt-on install, this no-drill kit features clamp-around frame brackets and manual inflation valves for straightforward pressure adjustments.
Technical Specifications
| Specification | Technical Detail |
|---|---|
| Load-Leveling Capacity | Up to 3,200 lbs (at 150 PSI Maximum) |
| Air Spring Style | Single-Sleeve LOGIQ Air Spring (1.6Hz Natural Frequency) |
| Operating Pressure Range | 10 PSI Minimum to 150 PSI Maximum |
| Installation Design | 100% Bolt-On Clamp-Around Brackets (No Frame Drilling) |
| Factory Bump Stop Retained | Yes (Preserves OEM Suspension Travel) |
| Hardware & Air Line Included | Pre-Assembled Brackets, Air Lines & Manual Schrader Valves |
Vehicle Fitment
- Chevrolet Silverado 1500: 2WD/4WD, Gas Engines (2.7L Turbo, 5.3L V8, 6.2L V8), 2019–2026
- GMC Sierra 1500: 2WD/4WD, Gas Engines (2.7L Turbo, 5.3L V8, 6.2L V8), 2019–2026
- Sensor Note: Models equipped with factory rear ride-height sensors require additional sensor relocation kit (SKU 88-31190-1).
- Lift Note: Vehicles with rear suspension lifts require ReadyAIR spacer block kit (SKU 88-91003). Un-supported on rear lifts larger than 3 inches.
- Fitment Note: Un-supported on 3.0L Duramax Diesel models with single exit exhaust, Silverado ZR2, GMC Sierra AT4X, Trail Boss, or AT4 factory-lifted trims without spacer modifications.
Installation Notes
- Requires zero frame drilling; installs using heavy-duty clamp brackets that align with factory leaf spring locations.
- Includes exhaust heat wrap kit to protect air spring sleeves from tailpipe radiant heat exposure.
- Route air lines away from moving suspension linkages and sharp frame edges to prevent air pressure leaks.
Frequently Asked Questions
Will this air spring kit make my truck ride rough when empty?
No. ReadyAIR single-sleeve LOGIQ springs operate at a compliant 1.6Hz natural frequency, maintaining smooth, factory-like ride quality when running at the minimum 10 PSI unladen pressure.
Do I need additional parts if my truck has factory height sensors?
Yes. Trucks equipped with factory rear ride-height sensors require the ReadyAIR sensor bracket kit (part 88-31190-1) to preserve sensor positioning.
SKU: 88-31190
Partager

readyair 88-31190, logiq 88-31190, silverado 1500 air helper springs, sierra 1500 towing air bags, load leveling kit gm 1500, no drill air bag kit, single sleeve air spring gm 1500, readylift load leveling spring kit