Zone Offroad
Zone Offroad 3.5" Adventure Series Lift Kit | 2021–2026 Ford Bronco Badlands 2-Door
Zone Offroad 3.5" Adventure Series Lift Kit | 2021–2026 Ford Bronco Badlands 2-Door
No se pudo cargar la disponibilidad de retiro
Zone Offroad 3.5" Adventure Series Lift Kit for 2021–2026 Ford Bronco Badlands 2-Door
Bottom Line: The Zone Offroad F101 Adventure Series Lift Kit is engineered specifically for the 2021–2026 Ford Bronco Badlands 2-Door equipped with the factory non-Sasquatch suspension. Designed around the Bronco's independent front suspension, this complete suspension system delivers a true 3.5-inch front lift and approximately 2.5-inch rear lift while maintaining factory ride quality, steering characteristics, and suspension geometry. The result is improved ground clearance, enhanced trail capability, and room for aggressive 35- to 37-inch tire combinations.
Because: Unlike entry-level spacer kits that simply increase ride height, the Adventure Series package incorporates Adventure Pro Series Upper Control Arms, precision-engineered two-piece front strut spacers, rear lift components, bump stop provisions, and vehicle-specific installation hardware. This engineered approach maintains proper CV axle angles, steering geometry, suspension articulation, and predictable handling both on the highway and during demanding off-road use.
Developed and manufactured by Zone Offroad, the F101 lift system is intended for enthusiasts who want increased wheel travel and tire clearance without sacrificing everyday drivability. Every major component has been engineered to work within the Bronco's factory suspension architecture, minimizing unnecessary stress on suspension and steering components while maximizing off-road capability.
One of the key advantages of this Adventure Series system is the inclusion of Adventure Pro Upper Control Arms. These heavy-duty control arms improve suspension travel while providing additional caster correction compared to factory components. Their maintenance-free ball joint design contributes to long-term reliability for vehicles regularly exposed to dirt, mud, snow, and rough terrain.
The innovative two-piece front strut spacer system raises the vehicle without excessively increasing suspension droop during full extension. By maintaining more favorable operating angles, the suspension retains predictable ride characteristics while reducing unnecessary wear on critical drivetrain components.
Whether navigating rocky trails, forest access roads, overlanding routes, or winter driving conditions, the F101 Adventure Series Lift Kit provides additional ground clearance and approach angles that help the Bronco perform with greater confidence. The increased ride height also accommodates larger wheel and tire packages for improved traction and a more aggressive appearance.
Designed as a true bolt-on system, the kit installs using factory mounting locations and includes the hardware necessary to complete installation. No welding is required. A professional wheel alignment is recommended immediately after installation to restore factory alignment specifications and ensure optimal tire wear and handling.
Technical Specifications
| Specification | Details |
|---|---|
| Manufacturer | Zone Offroad |
| Manufacturer Part Number | F101 |
| Vehicle | 2021–2026 Ford Bronco Badlands 2-Door |
| Suspension | Factory Non-Sasquatch |
| Front Lift | 3.5 inches |
| Rear Lift | 2.5 inches |
| Upper Control Arms | Adventure Pro Series Included |
| Front Design | 2-Piece Strut Spacer |
| Installation | Bolt-On |
| Welding Required | No |
| Maximum Tire Recommendation | 35–37 inches* |
| Estimated Install Time | 3–5 Hours |
Vehicle Fitment
- 2021 Ford Bronco Badlands 2-Door (Non-Sasquatch)
- 2022 Ford Bronco Badlands 2-Door (Non-Sasquatch)
- 2023 Ford Bronco Badlands 2-Door (Non-Sasquatch)
- 2024 Ford Bronco Badlands 2-Door (Non-Sasquatch)
- 2025 Ford Bronco Badlands 2-Door (Non-Sasquatch)
- 2026 Ford Bronco Badlands 2-Door (Non-Sasquatch)
Not Compatible With
- Ford Bronco Sport
- Ford Bronco Raptor
- Sasquatch-equipped Broncos
- 4-Door Bronco Models
- HOSS 3.0 Suspension
Installation Notes
- Professional installation is recommended.
- A four-wheel alignment must be completed after installation.
- No welding is required.
- CV axle nuts may require loosening and tightening with the vehicle at ride height.
- 35-inch tires fit with appropriate wheel specifications.
- 37-inch tires may require body mount or crash bar modifications depending on wheel offset and intended suspension travel.
- Re-torque suspension fasteners after the initial break-in period.
Frequently Asked Questions
Does this kit fit Sasquatch Broncos?
No. The F101 kit is designed exclusively for Badlands 2-Door models equipped with the factory Non-Sasquatch suspension.
Are upper control arms included?
Yes. Adventure Pro Series Upper Control Arms are included to improve suspension geometry, strength, and articulation.
Can I install 37-inch tires?
Yes. The suspension provides clearance for 37-inch tires; however, additional trimming or crash bar modifications may be required depending on wheel offset and off-road articulation.
Does the kit require welding?
No. The F101 Adventure Series Lift Kit is engineered as a complete bolt-on suspension system.
SKU: F101
Compartir

Complete Zone Offroad F101 suspension lift kit designed for the Ford Bronco Badlands 2-Door showing the lift components, Adventure Pro upper control arms, and installation hardware.